Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulbs on a Citroen Xsara Picasso?

Model: Citroen Xsara Picasso MK 1 - Years 1999-2012
Part: Headlight bulb

In this tutorial, you will see how to replace the front headlamp bulbs on a Citroen Xsara Picasso, a very simple and quick operation. Before proceeding, ensure that the key is not inserted. For the indicators, simply grasp the outer bulb holders and rotate them anti-clockwise. For the main headlamp, disconnect the power connector, remove the large rubber cap, and unlock the metal clip. Finally, the position light bulb is located in the lower inner area of the headlamp and can also be unscrewed easily.

Updated on 12 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Headlight Bulbs on Citroen Xsara Picasso
Replacing Headlight Bulbs on Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) Are the front headlight bulbs of your Xsara Picasso blown and need replacing? Here’s how to remove them. Open the front bonnet by pulling the lever l…
Removing the Bulb from Citroen Xsara Picasso
Removing the Bulb from Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) In this short but effective video, we will see how to remove the headlight bulb (main and dipped beam) from the Citroen Xsara Picasso. The process of…
Replacing Rear Headlamp Bulb on Citroen Xsara Picasso
Replacing Rear Headlamp Bulb on Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) In this video, you will see how to remove and replace the bulb of the rear headlamp on a Citroen Xsara Picasso. First, open the boot lid and then ope…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos