Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Headlight Bulbs on Citroen Xsara Picasso

Model: Citroen Xsara Picasso MK 1 - Years 1999-2012
Part: Headlight bulb

Are the front headlight bulbs of your Xsara Picasso blown and need replacing? Here’s how to remove them. Open the front bonnet by pulling the lever located at the bottom of the dashboard, and secure it with the prop rod. Lift the front bonnet. Remove the headlight cover using a screwdriver. Pull out the bulb holder from the headlight and extract the damaged bulbs with the help of a screwdriver. Fit the new bulbs (always of the correct type and size) and insert the bulb holder back into the headlight housing. Refit the headlight cover on the Citroen Xsara Picasso. Turn on the headlights of the Xsara Picasso and test their operation.

Updated on 18 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the "Service" Light on a Citroen Xsara Picasso
How to Reset the "Service" Light on a Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) Before you begin, sit in the driver's seat of your Citroen Xsara Picasso. Start by pressing and holding the button located at the bottom left of the …
Replacing Door Panel on Citroen Xsara Picasso
Replacing Door Panel on Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) Remove the door panel on a Xsara Picasso. Disconnect the battery terminals located in the engine bay. Remove the plastic from the door panel area (sp…
Where are the fuses of the Citroen Xsara Picasso 2.0 located?
Where are the fuses of the Citroen Xsara Picasso 2.0 located?
Citroen Xsara Picasso (1999-2012 / MK 1) Regarding the Citroen Xsara Picasso 2.0, the fuses used are installed in fuse boxes, which are housed in the engine compartment, next to the vehicle'…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos