Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the front headlight of the Citroen Xsara Picasso

Model: Citroen Xsara Picasso MK 1 - Years 1999-2012
Part: Headlight

These short and simple instructions will show us how to disassemble and replace the front headlight and its bulbs of the Citroen Xsara Picasso. First, we open the hood of the car and start disassembling and removing the front bumper; to do this, we unscrew all the fixing screws we find on the top of the bumper and on both sides of the front wheel arches, as shown in the video. At this point, we unscrew the headlight screws and disconnect the electrical connector of the bulbs, removing and replacing the optical group with the new one; we reassemble the headlight and finally the bumper!

Posted on 28 December 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacing Headlight Bulbs on Citroen Xsara Picasso
Replacing Headlight Bulbs on Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) Are the front headlight bulbs of your Xsara Picasso blown and need replacing? Here’s how to remove them. Open the front bonnet by pulling the lever l…
How to Remove the Rear Light on a Citroen Xsara Picasso
How to Remove the Rear Light on a Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) Here’s how to remove the rear light on a Citroen Xsara Picasso: open the boot lid, remove the inspection cover (located at the side of the boot), and…
Removing the Bulb from Citroen Xsara Picasso
Removing the Bulb from Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) In this short but effective video, we will see how to remove the headlight bulb (main and dipped beam) from the Citroen Xsara Picasso. The process of…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos