Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the spare wheel located in the Citroen Xsara Picasso?

Model: Citroen Xsara Picasso MK 1 - Years 1999-2012
Part: Wheel

As seen in this video, in the Citroen Xsara Picasso, the spare wheel is not located in the boot as is customary, but rather directly underneath it. To access it and release it from its housing, first open the tailgate, lift the floor carpet, and locate the large bolt near the outer edge, in the central area. Next, unscrew it using a large screwdriver or an equivalent tool, such as a spatula, until the wheel is completely on the ground. Once done, detach it from its support and proceed with replacing the flat tyre.

Updated on 21 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the "Service" Light on a Citroen Xsara Picasso
How to Reset the "Service" Light on a Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) Before you begin, sit in the driver's seat of your Citroen Xsara Picasso. Start by pressing and holding the button located at the bottom left of the …
Where are the fuses located in the Citroën Xsara Picasso?
Where are the fuses located in the Citroën Xsara Picasso?
Citroen Xsara Picasso (1999-2012 / MK 1) The fuse boxes in the Citroën Xsara Picasso contain the fuses that regulate the operation of the devices present in the vehicle: these are located in…
Where are the fuses located on a Citroën Xsara Picasso?
Where are the fuses located on a Citroën Xsara Picasso?
Citroen Xsara Picasso (1999-2012 / MK 1) On the Citroën Xsara Picasso, all fuses are divided between the designated fuse boxes installed in the vehicle: there are two, one located inside the…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos