Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. Xsara Picasso
    4. : Where are the fuses located in the Citroën Xsara Picasso?

Citroen Xsara Picasso - Video tutorial

Model: Citroen Xsara Picasso MK 1 - Years 1999-2012
Part: Fuse box
Operation: Where are the fuses located in the Citroën Xsara Picasso?

On the Citroën Xsara Picasso, all the fuses are divided into the appropriate fuse boxes that are installed on the vehicle: there are two of them, one inside the passenger compartment and one inside the engine compartment. The first one is located in the lower left part of the dashboard compared to the steering column: it contains the fuses for the courtesy lights, air conditioning, radio, etc. The second box is instead located on the right side of the engine compartment: it contains the fuses for the front lights, cooling fan, fuel pump, etc.


Posted on 19 March 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Xsara Picasso 1999-2012 - What is the air conditioning fuse on the Xsara Picasso 1.6 HDI? Read Answer
    • Xsara Picasso 1999-2012 - Where is the air conditioning fuse located in the Xsara Picasso? Read Answer
    • Xsara Picasso 1999-2012 - Where is the air conditioning fan fuse located on Citroen Xsara Picasso? Read Answer
    • Xsara Picasso 1999-2012 - What does the Citroën Xsara Picasso fuse F26 do? Read Answer
    • Xsara Picasso 1999-2012 - Where is the fuse for the passenger compartment blower on the Citroën Xsara Picasso located? Read Answer
    • Xsara Picasso 1999-2012 - Where is the Citroà «n Xsara Picasso car radio fuse located? Read Answer
    • Xsara Picasso 1999-2012 - Where is the air conditioning fuse on the Citroen Xsara Picasso? Read Answer
    • Xsara Picasso 1999-2012 - Where is the Citroà «n Xsara Picasso heater fan relay located? Read Answer

Replace the steering angle sensor on the Volkswagen Golf 5

When the steering angle sensor malfunction warning light comes on, it may need to be replaced as follows: first remove the steering wheel and the lower steering wheel guard by removing the three fixing screws. The steering sensor is located just below the steering column. To release it you need to have a small screwdriver and insert it into the hole on the front, push the screwdriver all the way down until the clips at the bottom are released. Next, pull down on the back of the card containing the sensor and disengage it from the steering column. At that point take the new card and reposition it, after which proceed backwards to reassemble the various components.

Watch the video!


by ScegliAuto

More videos