Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Fuel Pump from the Citroen Xsara Picasso 2.0 HDi

Model: Citroen Xsara Picasso MK 1 - Years 1999-2012
Part: Fuel pump

The instructions in this guide show how to remove and replace the fuel pump of the Citroen Xsara Picasso 2.0 HDi. First, open the tailgate and remove the floor covering; to correctly perform the replacement, it is necessary to remove the tank from below, or you can opt to cut the metal sheet for access to the pump from above, as shown in the video. Then, disconnect the fuel lines and the electrical connector of the float, unscrew the pump collar to remove it, and replace it with a new one.

Posted on 21 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the fuel pump of the Citroen Xsara Picasso 2.0 HDI
How to disassemble the fuel pump of the Citroen Xsara Picasso 2.0 HDI
Citroen Xsara Picasso (1999-2012 / MK 1) In this guide we will see the instructions that will allow us to disassemble and replace the floating fuel pump of the fuel tank of the Citroen Xsara…
How to Remove the Fuel Pump on a Citroen Xsara Picasso
How to Remove the Fuel Pump on a Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) Learn how to remove the floating fuel pump from a Citroen Xsara Picasso. Disconnect the battery cables, then remove the rear seat from the car (boot)…
How to Replace the Clutch on a Citroen Xsara Picasso 2.0 HDi
How to Replace the Clutch on a Citroen Xsara Picasso 2.0 HDi
Citroen Xsara Picasso (1999-2012 / MK 1) Today, we will discover the main instructions that will allow you to remove and replace the clutch on the Citroen Xsara Picasso 2.0 HDi. First, raise…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos