Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the High-Pressure Fuel Pump from the Citroen Xsara Picasso 2.0 HDI

Model: Citroen Xsara Picasso MK 1 - Years 1999-2012
Part: Fuel pump

In this guide, you will find instructions to remove and replace the high-pressure fuel pump from the Citroen Xsara Picasso 2.0 HDI. First, open the bonnet and begin by removing the engine mount while supporting the engine from below. Raise the vehicle and remove the crankshaft pulley by disconnecting the serpentine belt, as shown in the video. Next, remove the timing cover and disconnect the belt, loosening the bolts of the fuel pump and removing it along with the pulley, following the video tutorial to the end!

Updated on 13 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Fuel Pump from the Citroen Xsara Picasso 2.0 HDi
Removing the Fuel Pump from the Citroen Xsara Picasso 2.0 HDi
Citroen Xsara Picasso (1999-2012 / MK 1) The instructions in this guide show how to remove and replace the fuel pump of the Citroen Xsara Picasso 2.0 HDi. First, open the tailgate and remove…
How to disassemble the fuel pump of the Citroen Xsara Picasso 2.0 HDI
How to disassemble the fuel pump of the Citroen Xsara Picasso 2.0 HDI
Citroen Xsara Picasso (1999-2012 / MK 1) In this guide we will see the instructions that will allow us to disassemble and replace the floating fuel pump of the fuel tank of the Citroen Xsara…
Replacement of the timing belt of the Citroen Xsara Picasso 1.6 HDI
Replacement of the timing belt of the Citroen Xsara Picasso 1.6 HDI
Citroen Xsara Picasso (1999-2012 / MK 1) Below we discover how to dismantle and replace the timing belt of the Citroen Xsara Picasso 1.6 HDI. First of all, we open the hood of the car and st…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos