Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Windscreen Washer Pump in the Citroen C4 Picasso?

Model: Citroen C4 Picasso MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Pump

See other generations:
Video tutorial

In this tutorial, you will see how to replace the windscreen washer pump in the Citroen C4 Picasso, a very simple operation. First, lift the front right side with a jack, taking all necessary safety precautions, then remove both the wheel and the inner wheel arch cover by extracting all the various plastic rivets.

Next, locate the reservoir, remove it from the frame by unscrewing the relevant bolts, and disconnect the hoses. At this point, simply remove the old pump from the reservoir, position the replacement, and reassemble everything by following the reverse procedure.


Posted on 5 September 2026 by ScegliAuto


Related tutorials

How to Remove the Windscreen Washer Pump from the Citroen C4 Grand Picasso
How to Remove the Windscreen Washer Pump from the Citroen C4 Grand Picasso
Citroen C4 Picasso (2006-2013 / MK 1) In today's tutorial video, you will see the instructions that will allow you to remove and replace the windscreen washer pump of the Citroen C4 Grand…
How to Unscrew the Rear Wiper Nut on a Citroen C4 Picasso
How to Unscrew the Rear Wiper Nut on a Citroen C4 Picasso
Citroen C4 Picasso (2006-2013 / MK 1) If you are here, you probably need to replace the rear wiper, as it is a mechanical component that tends to wear over time, requiring maintenance. Ho…
How to Replace the Wiper Blades on a Citroën C4 Grand Picasso
How to Replace the Wiper Blades on a Citroën C4 Grand Picasso
Citroen C4 Picasso (2006-2013 / MK 1) To replace the wiper blades on the Citroën C4 Grand Picasso, lift the arms to which the blades are attached so that they do not touch the windscreen.…

Other guides you may be interested in

How to Replace the Battery in a BMW 2 Series Active Tourer?

To replace the battery in a BMW 2 Series Active Tourer, open the hood to access the components in the engine compartment: in the upper right corner, just below the windshield on the driver's side, you will find a panel to remove. The battery is located under this panel and can be removed by loosening the screws that secure it and disconnecting the power cables; this will allow you to connect and install the new battery to ensure everything functions correctly.

Watch the video!


by ScegliAuto

More videos