Do it yourself
Frequently asked questions about cars and motorcycles

How do you reset the tire anomaly warning light in the Hyundai Tucson rd?

Model: Hyundai Tucson NX4, MK 4 - Years: 2022, 2023, 2024, 2025, 2026
Part: Tire pressure warning light

See other generations:
Video tutorial

As soon as the tire-shaped warning light, with an exclamation point in the center, lights up on the onboard computer, it is advisable to stop the vehicle and check if there are flat or punctured tires. Clearly, the priority is to address one of the aforementioned problems, then it should be remembered to reset the mentioned warning light.

In the video above, we are explained how to do it: Simply inflate all four tires to the recommended pressure indicated by the manufacturer, without the use of diagnostic tools or special procedures, in fact the warning light will reset automatically.


Posted on 21 November 2025 by ScegliAuto


Related tutorials

Hyundai Tucson (2015-2021 / MK 3, TL) The 2019 Hyundai Tucson, as shown in the video presentation provided here, comes equipped with a tire anomaly warning light, just like most vehicles …
Hyundai Tucson (2015-2021 / MK 3, TL) To reset the tyre pressure warning light on a Hyundai Tucson, turn on the ignition to check via the onboard computer which tyres are under-inflated. …
Hyundai Tucson (2004-2009 / JM, MK 1) To reset the tyre pressure warning light on a Hyundai Tucson, you need to inflate the tyres to the recommended pressure. The correct inflation pressu…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos