Do it yourself
| ||||
|
Jeep Renegade - Video tutorial
Model: Jeep Renegade
BU, 520, MK 1
- Years 2014-2023 Today's guide will show us how to activate or deactivate the parking sensors and park assist of the Jeep Renegade. First, let's get inside the vehicle and start pressing the parking sensors button, which we can find above the air conditioning controls; if the LED on the button is illuminated, it means that the parking sensors are deactivated, vice versa. Now let's press the park assist button, which we can find next to the parking sensors button; the vehicle will start searching for any available parking space, prompting us to engage reverse gear to start the automatic parking!
Posted on 4 November 2023 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.012
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |