Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha Xmax 125
Part: Battery

It will be possible to replace the battery of the Yamaha Xmax 125 by loosening the screws that secure the windshield of the motorcycle to its housing in the upper front part of the vehicle: once the windshield has been removed, it will also be necessary to loosen the screws that secure the upper front shield so that the underlying battery can be located. This can now be freed from the fixing screws of the supports and from the power cables so that it can be removed. After removal, the new battery can be inserted to verify that everything works correctly.

Posted on 13 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Battery on a Yamaha Xmax 125
How to Replace the Battery on a Yamaha Xmax 125
Xmax 125 This brief video tutorial shows the steps necessary to replace the battery on a Yamaha Xmax 125. This is a very simple operation that you can carry o…
How to disassemble the rear wheel on the Yamaha XMAX 125 scooter?
How to disassemble the rear wheel on the Yamaha XMAX 125 scooter?
Xmax 125 In this tutorial we can see how to disassemble the rear wheel on the Yamaha XMAX 125 scooter, an extremely simple and fast operation. First of all, w…
How to Access the Battery in a Yamaha XMAX 125 Scooter?
How to Access the Battery in a Yamaha XMAX 125 Scooter?
Xmax 125 In this tutorial, you will see how to access the battery in a Yamaha XMAX 125 scooter, a very simple and quick operation, for example, if you need to…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos