Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha Xmax 125
Part: Battery

The instructions in this guide will show you how to remove and replace the battery of the Yamaha Xmax 125 scooter. First, place the scooter on its stand and start by removing the front panel by unscrewing the fairing screws; once removed, you will have access to the battery compartment, as shown in the video. At this point, disconnect both battery terminals (positive and negative), removing it from its compartment; refit and connect the new battery, of the correct type and with the same amperage, then reassemble the front fairing and check the engine starts!

Posted on 31 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the battery of the Yamaha Xmax 125?
How do you replace the battery of the Yamaha Xmax 125?
Xmax 125 It will be possible to replace the battery of the Yamaha Xmax 125 by loosening the screws that secure the windshield of the motorcycle to its housing…
How to Replace the Battery on a Yamaha Xmax 125
How to Replace the Battery on a Yamaha Xmax 125
Xmax 125 This brief video tutorial shows the steps necessary to replace the battery on a Yamaha Xmax 125. This is a very simple operation that you can carry o…
How to Access the Battery in a Yamaha XMAX 125 Scooter?
How to Access the Battery in a Yamaha XMAX 125 Scooter?
Xmax 125 In this tutorial, you will see how to access the battery in a Yamaha XMAX 125 scooter, a very simple and quick operation, for example, if you need to…

How to Replace the Rear View Mirror on a Honda Forza

To replace the rear view mirror on a Honda Forza, use a screwdriver to lever under the front cover of the fairing to detach it. Underneath, you will find the bolts securing the windscreen and its support: by removing these, you can access the screws holding the rear view mirror. Unscrew these screws and disconnect the connectors attached to the mirrors, allowing you to completely remove them and install the new ones: these must be connected to the connectors, positioned in their place, and secured with the appropriate bolts.

Watch the video!


by ScegliAuto

More videos