Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To remove the exhaust of a Moto Guzzi V7, start by making sure the motorcycle is turned off and securely positioned on a stable stand. Wait for the exhaust to cool completely to avoid burns. Locate the screws or bolts that secure the exhaust to the manifold and frame of the motorcycle. Use the appropriate tools, such as a wrench or an Allen key, to loosen and remove these fastenings. Once detached, firmly grasp the exhaust and carefully remove it, applying a slight rotation if necessary to facilitate detachment. Check for any gaskets or rings that may get stuck, then place the exhaust in a safe place.

Posted on 3 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Dismantle the Rear Drive on the Moto Guzzi V7?
How to Dismantle the Rear Drive on the Moto Guzzi V7?
V7 Classic In today's tutorial video, we will see the main instructions on how to dismantle and replace the rear drive on the Moto Guzzi V7. First, lift your mo…
How to change the motor oil of a Moto Guzzi V7?
How to change the motor oil of a Moto Guzzi V7?
V7 Classic Good morning! Today we will dedicate ourselves to replacing the oil on our Moto Guzzi V7. To begin, we place the motorcycle on the center stand and l…
Air Filter Replacement on Moto Guzzi V7 3
Air Filter Replacement on Moto Guzzi V7 3
V7 Classic In this video tutorial, we will see how to disassemble and replace the air filter of a Moto Guzzi V7 3 in simple steps. Start by removing the seat of…

How to reset the oil light on the Honda SH 125

If the oil light appears on your Honda SH 125 dashboard despite having recently changed the oil, don't worry as you can resolve this minor issue with a simple manual reset procedure. First, turn on the ignition and hold down the "Info A" and "Info B" buttons located at the bottom of the left knob. At this point, press the "Info B" button multiple times until the oil change indicator starts to flash. Finally, press the "Info A" button once to perform the reset. The procedure is now complete.

Watch the video!


by ScegliAuto

More videos