|
Do it yourself
| |||
| ||||
Model: Gasgas Ec 250
To remove the rear wheel of the GasGas EC 250, first dismantle the chain by removing it from the sprocket attached to the rear wheel. Once the chain is removed, you can unscrew the nut that secures the rear wheel spindle and holds it to the swingarm. When the securing spindle is removed, you can completely take out the wheel from its housing and replace it with a new spare part. After replacement, refit the securing spindle and reposition the chain around the sprocket.
Updated on 5 August 2026 by ScegliAuto
Video tutorial
Related tutorials
Ec 250
To replace the bearing on the GasGas EC 250, you need to remove the rear wheel by taking the chain off its sprocket and loosening the nuts that secur…
Ec 250
To replace the rear sprocket on the GasGas EC 250, loosen the bolt that secures the central spindle, which holds the rear wheel to the swingarm. Once…
Ec 250
The procedure for replacing the brake pads on the GasGas EC 250 is the same for both the front and rear wheels. Use a screwdriver to push the pads aw…
|
How to Service the Piaggio Vespa GTS 300
This brief guide will illustrate the main steps to perform the routine maintenance service on the Piaggio Vespa GTS 300, replacing the engine oil and oil filter. First, place the scooter on the centre stand and start by unscrewing the oil drain bolt found under the engine, allowing it to drain into a container for about ten minutes; then unscrew the oil filter cartridge using the appropriate tool, and hand-tighten the new one. Finally, unscrew the filler cap and top up, filling to the maximum level mark! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.008
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |