Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Gasgas Ec 250
Part: Bearing

To replace the bearing on the GasGas EC 250, you need to remove the rear wheel by taking the chain off its sprocket and loosening the nuts that secure the wheel's locking spindle. Once the spindle has been removed, you can completely detach the wheel from its swingarm. This way, the bearing located at the centre of the wheel can be slid out and replaced with a new spare part. Once its interior has been properly lubricated, you can remount the wheel onto the swingarm and secure it with the appropriate nuts.

Updated on 7 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Brake Pads on a GasGas EC 250
How to Replace the Brake Pads on a GasGas EC 250
Ec 250 The procedure for replacing the brake pads on the GasGas EC 250 is the same for both the front and rear wheels. Use a screwdriver to push the pads aw…
How to Remove the Rear Wheel of the GasGas EC 250?
How to Remove the Rear Wheel of the GasGas EC 250?
Ec 250 To remove the rear wheel of the GasGas EC 250, first dismantle the chain by removing it from the sprocket attached to the rear wheel. Once the chain …
How do you replace the exhaust pipe of the GasGas EC 250?
How do you replace the exhaust pipe of the GasGas EC 250?
Ec 250 The replacement of the GasGas EC 250 exhaust is done by loosening the screws that secure the side fairings of the motorcycle, at the rear fender of t…

How to Replace the Engine Oil in the KTM Duke 390?

As you can see in this tutorial, replacing the engine oil in the KTM Duke 390 is a very simple and quick task. Before proceeding, wait until the engine is completely cold to work safely. Start by placing a container underneath the bike, then locate the drain plug on the lower left side and unscrew it with a socket wrench. Once all the oil contained in the engine has drained out, open the filter housing cap, replace the filter, and reassemble everything. Finally, insert new oil through the designated upper hole.

Watch the video!


by ScegliAuto

More videos