Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha Yamaha R1
Part: Clock

In order to set the clock on the Yamaha R1, you need to turn on the instrument panel by inserting the ignition key into the lock and turning it: once the panel is on, you can proceed by holding down the SELECT and RESET buttons simultaneously. In this way, you will notice that the hours displayed on the instrument panel will start flashing; by repeatedly pressing the RESET button, you can change the hours. At this point, you can press the SELECT button and notice that the minutes will start flashing and can be changed in the same way.

Posted on 13 April 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Seat of a Yamaha R1
How to Remove the Seat of a Yamaha R1
Yamaha R1 Before you start, position your Yamaha R1 vertically for easier access to the seat. Begin by moving the end of the seat just enough to reach the secu…
How do you disassemble the Yamaha R1 engine?
How do you disassemble the Yamaha R1 engine?
Yamaha R1 The disassembly of the Yamaha R1 engine block can be carried out by loosening the screws that secure the engine block to its housing, which will be l…
How to Replace the Battery of the Yamaha R1?
How to Replace the Battery of the Yamaha R1?
Yamaha R1 To replace the battery of the Yamaha R1, loosen the screws located at the rear of the seat so that it can be lifted and completely removed. This will…

How to Replace the Engine Oil and Oil Filter on an Aprilia RSV 1000

This short video will show you how to carry out the routine maintenance service by replacing the engine oil and oil filter on the Aprilia RSV 1000 motorcycle. First, place your motorcycle on the centre stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then use the appropriate tool to unscrew and remove the oil filter, replacing the cartridge with a new one as shown in the video. Finally, unscrew the filler screw and top up by pouring in the suitable oil for your engine!

Watch the video!


by ScegliAuto

More videos