Do it yourself
| ||||
|
Model: Yamaha Yamaha R1
Before we can begin, we will have to go and position our Yamaha R1 vertically, so as to work more comfortably on the saddle. So let's start by moving the end of the saddle, just enough to reach the relative fixing screws. After that, we will have to go and unscrew and remove the screws we have reached. By doing so, we will have freed the driver's seat. At this point, there is nothing left to do but remove the driver's seat from its housing. When we have completed this last step, we will have finished disassembling the saddle of our Yamaha R1.
Posted on 31 January 2024 by ScegliAuto
|
How do you replace the front headlight of the Husqvarna 701?The procedure for replacing the front headlight on the Husqvarna 701 involves loosening the four 30 torx screws located on the sides of the headlight, between the front wheel fork and the plastic panel. Once all the screws are loosened, it will be possible to remove the plastic front cover to which the headlight, containing the bulbs, is attached. It will be necessary to disconnect the connector and remove the old bulb from its housing. Then it will be possible to insert the new bulb into its proper seat and connect the connector. Finally, it will be necessary to reassemble the headlight assembly and secure the fairing. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.004
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |