Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
As usual, before starting any maintenance operation on any motorcycle, ensure the bike is in a stable and safe position to work on, safeguarding the operator's safety. In this case, place your Yamaha on the stand. Next, remove the seat and locate the speed connector. Connect the two plugs (male and female) to the gear indicator. Now, after selecting the background colour of the display, proceed to calibrate the gears by inputting the required gear with constant throttle. It finishes when the next gear number appears. Without turning off the ignition, check if the test was successful. If not, you can restart the test.

Updated on 20 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Gear Indicator on a Mercedes E-Class
How to Replace the Gear Indicator on a Mercedes E-Class
Mercedes Classe E (2002-2009 / W211) Removing the gear indicator on a Mercedes E-Class? It's a very easy task, let's go through the disassembly. Position the gear shift knob vertically, …
Functionality of the Automatic Gearbox of the Mini F60
Functionality of the Automatic Gearbox of the Mini F60
Mini (2017-2023 / Countryman2, F60) Let’s look at the functionalities of the automatic gearbox of the Mini F60; on the automatic gearbox, a number of letters are described: "P" is for p…
How to Replace the Gear Indicator on a Cruze
How to Replace the Gear Indicator on a Cruze
Chevrolet Cruze (2009-2015 / MK 1, J300) Remove the gear indicator on a Chevrolet Cruze? This operation is very easy; follow the disassembly steps. Position the gear knob vertically, then us…

How to Remove the Cylinder Head from the LML Star 200 Engine?

To remove the cylinder head from the LML Star 200 engine, you will need to loosen the bolts that secure the engine block to its housing at the rear of the frame. Once the engine is freed, proceed to disconnect the coil from the top of the cylinder and also loosen the bolts of the valve cover. This will allow the head to be freed from the bolts securing it to the top of the engine. Now you can detach it to insert the new one and remount the engine block in its place.

Watch the video!


by ScegliAuto

More videos