Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Gear Indicator on a Mercedes E-Class

Model: Mercedes Classe E W211 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Checks and maintenance

See other generations:
Video tutorial

Removing the gear indicator on a Mercedes E-Class? It's a very easy task, let's go through the disassembly. Position the gear shift knob vertically, then use a plastic pry tool to remove the trim around the center console.

Remove the knob from the top of the shaft to take off the cover. Next, use a screwdriver to unscrew the fastening screws of the bezel that includes the gear indicator.

Remove the gear indicator and disconnect the electrical connector. Install the new gear indicator onto the plastic trim and then onto the center console.

Test the proper operation of the indicator once the installation is complete.


Updated on 28 March 2026 by ScegliAuto


Related tutorials

Reset of the service indicator for the Mercedes E-Class.
Reset of the service indicator for the Mercedes E-Class.
Mercedes Classe E (2016-2023 / W213) .. indicator (service) of the Mercedes E-Class. First, let's get inside the vehicle and turn on the instrument panel; then we enter the service.. …
How to Change the Key Fob Battery of a Mercedes E-Class
How to Change the Key Fob Battery of a Mercedes E-Class
Mercedes Classe E (2009-2016 / W212) .. you change the key fob battery of a Mercedes E-Class? Let's see in this detailed video how to do it. Take your key fob and slide the button to release.. …
How to Replace the Turn Signal in the Mirror on a Mercedes E-Class?
How to Replace the Turn Signal in the Mirror on a Mercedes E-Class?
Mercedes Classe E (2009-2016 / W212) .. turn signal in the side mirror on a Mercedes E-Class, a very simple and quick operation. First, ensure that the key is not in the ignition. Then, tilt.. …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos