Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the engine oil of a Triumph Speed 400?

Model: Triumph Speed 400
Part: Engine oil

Video tutorial

To replace the motor oil of a Triumph Speed 400, start by placing the motorcycle on a flat surface and make sure the engine is warm but not too hot. Locate the oil fill cap on the engine and unscrew it. Place a collection container under the oil drain plug on the oil pan and unscrew the plug to drain the used oil. Once the draining is complete, screw the drain plug back in. Remove and replace the oil filter using an oil filter wrench.

Apply some new oil to the gasket of the new filter before installation.

Fill the engine with new oil through the fill cap opening until reaching the recommended level, and we will have completed the replacement.


Posted on 8 December 2024 by ScegliAuto


Related tutorials

How to Change the Engine Oil in the Triumph Speed 400?
How to Change the Engine Oil in the Triumph Speed 400?
Speed 400 In this tutorial, you will see how to change the engine oil in the Triumph Speed 400, a very simple and quick operation. First, ensure the engine is …
How to Change the Gear Oil on a Triumph Speed 400?
Speed 400 To change the gear oil on a Triumph Speed 400, start by positioning the motorcycle on a flat and stable surface, using a centre or side stand to ensu…
How to Change the Engine Oil of a Triumph Speed 400?
How to Change the Engine Oil of a Triumph Speed 400?
Speed 400 To change the engine oil of a Triumph Speed 400, ensure the engine is cold. Lift the bike onto a stand for stability. Remove the oil filler cap from …

How to Replace the Piston on a Derbi GPR 125

To replace the piston on a Derbi GPR 125, loosen the bolts securing the cylinder head to its housing, allowing it to be removed along with the valve cover. This will enable you to access the bolts securing the cylinder at the top of the engine, allowing for its complete removal and revealing the underlying piston. The piston can now be freed from its securing bolts, enabling you to position the new piston onto the corresponding conrod. After installation, refit the engine components.

Watch the video!


by ScegliAuto

More videos