Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil of a Triumph Speed 400?

Model: Triumph Speed 400
Part: Engine oil

Video tutorial

To change the engine oil of a Triumph Speed 400, ensure the engine is cold. Lift the bike onto a stand for stability.

Remove the oil filler cap from the oil tank and position a container underneath to collect the used oil. Completely drain the old oil. Refit the oil filler cap and fill the tank with high-quality new oil using a funnel. Make sure to use the oil recommended for your bike and follow the owner's manual for the correct quantity.

Tighten the oil filler cap securely and clean up any spills. Once this is done, the bike will be ready for use.


Updated on 27 September 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil in the Triumph Speed 400?
How to Change the Engine Oil in the Triumph Speed 400?
Speed 400 In this tutorial, you will see how to change the engine oil in the Triumph Speed 400, a very simple and quick operation. First, ensure the engine is …
How to Change the Gear Oil on a Triumph Speed 400?
Speed 400 To change the gear oil on a Triumph Speed 400, start by positioning the motorcycle on a flat and stable surface, using a centre or side stand to ensu…
How to Change the Engine Oil on the Triumph Speed 400?
How to Change the Engine Oil on the Triumph Speed 400?
Speed 400 You can change the engine oil on the Triumph Speed 400 by loosening the drain plug located at the bottom centre of the vehicle: once the plug is remo…

How to Clean the Throttle Body on a Piaggio Beverly

In today's video, see how to clean the throttle body on a Piaggio Beverly. This operation applies to all models of the Beverly from 125 to 500 over various years. First, remember to work only with a cold engine to avoid unpleasant burns. Next, remove the seat by unscrewing the appropriate fastening clips. Once done, proceed to remove the scooter's body; find and remove the appropriate fastening clips. At this point, you can carry out the work in question and then reassemble everything as it was.

Watch the video!


by ScegliAuto

More videos