Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha Yamaha R1
Part: Engine

The disassembly of the Yamaha R1 engine block can be carried out by loosening the screws that secure the engine block to its housing, which will be located in the central lower part of the motorcycle: once the engine block fixing screws have been removed, it will be possible to proceed by disconnecting the cables and intake and exhaust manifolds. Now it will be necessary to unscrew the screws that secure the cylinder head and then locate the pistons: by removing these from the corresponding connecting rods, it will be possible to proceed by accessing the crankshaft and thus replacing all the components.

Posted on 13 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Seat of a Yamaha R1
How to Remove the Seat of a Yamaha R1
Yamaha R1 Before you start, position your Yamaha R1 vertically for easier access to the seat. Begin by moving the end of the seat just enough to reach the secu…
How to Replace the Clutch on the Yamaha R1?
Yamaha R1 The procedure for replacing the clutch on the Yamaha R1 involves loosening all the bolts securing the cover on the right side of the vehicle. Once al…
How to Replace the Battery of the Yamaha R1?
How to Replace the Battery of the Yamaha R1?
Yamaha R1 To replace the battery of the Yamaha R1, loosen the screws located at the rear of the seat so that it can be lifted and completely removed. This will…

How to Replace the Engine Oil and Oil Filter on an Aprilia RSV 1000

This short video will show you how to carry out the routine maintenance service by replacing the engine oil and oil filter on the Aprilia RSV 1000 motorcycle. First, place your motorcycle on the centre stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then use the appropriate tool to unscrew and remove the oil filter, replacing the cartridge with a new one as shown in the video. Finally, unscrew the filler screw and top up by pouring in the suitable oil for your engine!

Watch the video!


by ScegliAuto

More videos