Do it yourself
Frequently asked questions about cars and motorcycles
The replacement of the GasGas EC 250 exhaust is done by loosening the screws that secure the side fairings of the motorcycle, at the rear fender of the motorcycle. Once these side panels have been completely removed, it will be possible to loosen the screws that secure the exhaust in the area of the support at the top. Then it must be freed from its exhaust pipe by loosening the fixing ring, and completely removing the exhaust. In this way it will be possible to insert the new exhaust into its housing, securing it to the appropriate supports.

Posted on 20 April 2024 by ScegliAuto

Video tutorial

Related tutorials

Ec 250 To replace the exhaust on the GasGas EC 250, loosen the screws securing the side panels of the bike at the rear. Once these panels are removed, you c…
Ec 250 To replace the exhaust on the GasGas EC 250F, loosen the bolts that secure the exhaust cover at the rear, on the right side of the bike. By loosening…
Ec 250 To replace the starter motor on the GasGas EC 250, locate its housing on the left side of the bike, just above the clutch cover. The part can be remo…

How to Replace the Rear Mudguard on the Ducati Monster 696?

In this tutorial, see how to replace the rear mudguard on the Ducati Monster 696, a very simple and quick operation. First, remove the seat, then temporarily disconnect the exhaust silencer to gain working space. Next, locate the four fixing bolts of the mudguard, loosen them using an Allen key, and separate the mudguard from the frame. At this point, disconnect the rear light connector, attach the replacement, and reassemble everything by following the procedure in reverse.

Watch the video!


by ScegliAuto

More videos