|
Do it yourself
| |||
| ||||
Model: Gasgas Ec 250
To replace the solenoid valve on a GasGas EC 250, first open the coolant drain cap, then unscrew the mounting bolts at the front of the exhaust. This will allow access to the solenoid valve cover by unscrewing the screws that secure its lid. Once opened, you can slide the solenoid valve out for replacement with a new spare part. After replacing it, close the cover and reassemble the front part of the exhaust.
Updated on 13 June 2026 by ScegliAuto
Video tutorial
Related tutorials
Ec 250
To replace the exhaust on the GasGas EC 250, loosen the screws securing the side panels of the bike at the rear. Once these panels are removed, you c…
Ec 250
To replace the piston on a GasGas EC 250, you need to completely remove the engine from its housing: to do this, loosen the bolts that secure it to t…
Ec 250
To replace the starter motor on the GasGas EC 250, locate its housing on the left side of the bike, just above the clutch cover. The part can be remo…
|
How to replace the air filter in the Herald Classic 125?
In this tutorial, you will see how to replace the air filter in the Herald Classic 125, a very simple and quick operation. First, position yourself on the left side of the motorcycle, then grab the panel located under the seat, pull it towards you, and detach it from the frame. Next, unscrew the three fastening screws of the airbox cover, remove it, and take out the old filter from its housing. At this point, remove any dirt residue present, insert the replacement filter, and reassemble everything by following the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.005
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
