Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the exhaust on the GasGas EC 250, loosen the screws securing the side panels of the bike at the rear. Once these panels are removed, you can loosen the screws fixing the exhaust at the upper support. Then, detach it from its exhaust pipe by loosening the retaining ring, and completely remove the exhaust. This will allow you to fit the new exhaust into its housing, securing it to the appropriate supports.

Updated on 20 June 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Replace the Solenoid Valve on a GasGas EC 250?
How to Replace the Solenoid Valve on a GasGas EC 250?
Ec 250 To replace the solenoid valve on a GasGas EC 250, first open the coolant drain cap, then unscrew the mounting bolts at the front of the exhaust. This…
How to Replace the Exhaust on a GasGas EC 250F?
How to Replace the Exhaust on a GasGas EC 250F?
Ec 250 To replace the exhaust on the GasGas EC 250F, loosen the bolts that secure the exhaust cover at the rear, on the right side of the bike. By loosening…
How to Replace the Starter Motor on the GasGas EC 250
How to Replace the Starter Motor on the GasGas EC 250
Ec 250 To replace the starter motor on the GasGas EC 250, locate its housing on the left side of the bike, just above the clutch cover. The part can be remo…

How to replace the coolant in the BMW S1000 R

Today, we will see in this video tutorial how to bleed and replace the coolant in the BMW S1000 R motorcycle. First, place your motorcycle on a stand and start unscrewing the bleed screw located on the water pump casing, found at the bottom right; let the fluid drain into a container for about ten minutes. Now, unscrew the radiator cap and top up with the new coolant, the correct type for your radiator; fill it to the maximum level mark, starting the engine to circulate the fluid!

Watch the video!


by ScegliAuto

More videos