Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the starter motor on the GasGas EC 250, locate its housing on the left side of the bike, just above the clutch cover. The part can be removed from its housing after disconnecting the connectors and unscrewing the fixing bolts. Once the old starter motor is freed, you can install a new one: connect it to the connectors and secure it with the bolts. After installation, check that the device operates correctly.

Updated on 7 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Starter Motor from the GasGas EC 250?
How to Remove the Starter Motor from the GasGas EC 250?
Ec 250 To remove the starter motor from the GasGas EC 250, first loosen the screws that secure the device to its housing, then disconnect all previously rem…
How to Replace the Piston on a GasGas EC 250?
How to Replace the Piston on a GasGas EC 250?
Ec 250 To replace the piston on a GasGas EC 250, you need to completely remove the engine from its housing: to do this, loosen the bolts that secure it to t…
How to Replace the Exhaust on the GasGas EC 250?
Ec 250 To replace the exhaust on the GasGas EC 250, loosen the screws securing the side panels of the bike at the rear. Once these panels are removed, you c…

How to Replace the Battery in a Yamaha FZ6?

Replacing the battery in the Yamaha FZ6, as shown in this tutorial, is a very simple and quick operation. First, ensure that the key is not inserted, then remove the rider's seat and, using a 10mm socket spanner, loosen the bolt on the tank hinge. Next, unscrew both the front bolts and the fairing mounting bolts, lift the entire tank, and disconnect both terminals starting with the negative. At this point, you can remove the upper plastic plate, take the battery out of its housing, and fit the replacement.

Watch the video!


by ScegliAuto

More videos