|
Do it yourself
| |||
| ||||
Model: Honda Cbr 150
The time adjustment of the Honda CBR 150R is done by turning on the instrument panel, inserting the ignition key into the corresponding slot: once the panel is turned on, it will be possible to hold down both buttons located at the bottom. This will allow the hours to flash and they can be adjusted by pressing the button on the right of the panel; once the hours are set, the button on the left can be pressed, making the minutes flash and adjusting them in the same way. After the adjustment, the panel can be turned off.
Posted on 11 December 2024 by ScegliAuto
Video tutorial
Related tutorials
Cbr 150
To set the clock on a Honda CBR 150R, turn on the instrument cluster by inserting the ignition key into the ignition switch: once the display is on, …
Cbr 150
In this video, you will see how to disassemble and replace the sprocket and pinion on a Honda CBR 150 motorcycle, as well as on the CBR 125. First, r…
Cbr 150
To replace the clutch on the Honda CBR 150, loosen all the screws securing the clutch cover, which is located on the left side of the bike. Once the …
|
How to Replace the Coolant in the Piaggio Medley 125?
To replace the coolant in the Piaggio Medley 125, loosen the screws securing the side grille of the scooter to remove it and access the radiator underneath. At the base of the radiator, locate the drain plug, which must be unscrewed to allow the coolant to flow into a suitably positioned container. Next, open the under-seat compartment and locate the coolant refill cap: by opening this cap, you can insert the new coolant. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.005
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |