Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Honda Cbr 150
Part: Clutch

To replace the clutch on the Honda CBR 150, loosen all the screws securing the clutch cover, which is located on the left side of the bike. Once the cover is removed, you will be able to access the underlying clutch. To remove it, unscrew all the bolts securing the clutch plates: these plates can then be removed from their housing to insert the new replacement parts. After securing the plates in their housing, cover everything with the clutch cover to ensure proper operation.

Updated on 10 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Sprocket and Pinion on a Honda CBR 150
How to Replace the Sprocket and Pinion on a Honda CBR 150
Cbr 150 In this video, you will see how to disassemble and replace the sprocket and pinion on a Honda CBR 150 motorcycle, as well as on the CBR 125. First, r…
How do you set the clock on the Honda CBR 150?
How do you set the clock on the Honda CBR 150?
Cbr 150 The time adjustment of the Honda CBR 150R is done by turning on the instrument panel, inserting the ignition key into the corresponding slot: once th…
How to Replace the Battery on a Honda CBR 150R
How to Replace the Battery on a Honda CBR 150R
Cbr 150 To replace the battery on a Honda CBR 150R, insert the key into the side lock to unlock the rear part of the seat: once this part is removed, you can…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos