|
Do it yourself
| |||
| ||||
Model: Gasgas Ec 250
The procedure for replacing the brake pads on the GasGas EC 250 is the same for both the front and rear wheels. Use a screwdriver to push the pads away so they do not stick directly to the disc. Once the pads are moved, loosen the bolt that secures the pin to which the pads and caliper are connected: by removing this pin, the old pads can be taken out from inside the caliper and new replacement parts can be inserted, securing them with the pin.
Updated on 5 May 2026 by ScegliAuto
Video tutorial
Related tutorials
Ec 250
As you are working on the brakes, it is advisable to also change the brake fluid. Using a cutting tool, move the brake caliper to relieve pressure on…
Ec 250
As clearly shown in the video, to space the pads away from the disc, use a medium-large flathead screwdriver or a crowbar, inserting it between the p…
Ec 250
In this tutorial, we will go through the steps to dismantle the carburettor on a Gasgas EC 250 enduro bike, following the instructions below. First, …
|
How to Replace the Clutch on a Triumph Speed Triple?
To replace the clutch on a Triumph Speed Triple, loosen the bolts securing the covers of the three casings located on the right side of the bike, namely the starter motor, the engine, and then the clutch. Once these covers are removed, you can access the bolts securing the clutch, unscrew them, and slide the clutch plates out of their housing. This will allow you to insert the new plates into their place, securing everything with the appropriate bolts; finally, reinstall all the casings. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
