Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Brake Pads on a Gasgas EC 250

Model: Gasgas Ec 250
Part: Brake pads

Video tutorial

As clearly shown in the video, to space the pads away from the disc, use a medium-large flathead screwdriver or a crowbar, inserting it between the pad and the disc while being careful not to scratch the latter. Work slowly and patiently during this operation.

Now, still using a flathead screwdriver, unscrew the bolt that holds the pads inside the caliper. Once done, unscrew the pin itself with an Allen key. Insert the new pads, which will obviously be thicker than the previous ones, and proceed to reassemble by fitting the caliper pin back.


Updated on 15 April 2026 by ScegliAuto


Related tutorials

How to Replace the Brake Pads on a GasGas EC 250
How to Replace the Brake Pads on a GasGas EC 250
Ec 250 The procedure for replacing the brake pads on the GasGas EC 250 is the same for both the front and rear wheels. Use a screwdriver to push the pads aw…
Changing Brake Pads on a Gasgas EC 250
Changing Brake Pads on a Gasgas EC 250
Ec 250 As you are working on the brakes, it is advisable to also change the brake fluid. Using a cutting tool, move the brake caliper to relieve pressure on…
Dismantling the Carburettor on a Gasgas EC 250
Dismantling the Carburettor on a Gasgas EC 250
Ec 250 In this tutorial, we will go through the steps to dismantle the carburettor on a Gasgas EC 250 enduro bike, following the instructions below. First, …

How to Replace the Front Indicator Bulbs on a Piaggio Vespa GTS

In this tutorial, see how to replace the front indicator bulbs on a Piaggio Vespa GTS, a very simple and quick operation. You will need a crosshead screwdriver and the correct replacement parts. First, ensure the key is not in the ignition, then unscrew the single fixing screw of the lamp unit, pull it towards you, and separate it from the housing. Next, grasp the upper bulb, turn it counterclockwise, and remove it from the headlamp. At this point, insert the replacement and repeat the process for the opposite side if necessary.

Watch the video!


by ScegliAuto

More videos