Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Ktm
    3. : 125 Xcw

How to Install the Key Switch on the KTM Xcw 125

Model: Ktm 125 Xcw
Part: Key

Video tutorial

In this video, you will see how to install the key switch on the KTM Xcw 125, which comes from the factory without one: remove the front cover, and connect the key switch to the metal plate that supports the side indicator. Here, you will make a hole to position the switch, from which three connectors will lead to the faston, from which you will run the yellow and brown wires to the connector with 4 holes, which is a kill switch.

If you do not want to mount the plate, you can also attach it with cable ties to the handlebars or the riser, as preferred. You can find the switch, for example, on Amazon with the code B09JYN9KMC at the price of £15.99, with free delivery for Prime customers.


Updated on 10 November 2026 by ScegliAuto


Related tutorials

Service on KTM 125 XC-W
Service on KTM 125 XC-W
125 Xcw Start the engine for a few minutes to warm up the oil, making it more liquid for a quicker and more effective drain. As shown in the video, remove th…

How to Replace Engine Oil in the Husqvarna TE 610?

In this tutorial, you will see how to replace the engine oil in the Husqvarna TE 610, a very simple and quick operation. Before proceeding, wait for the engine to cool completely to operate safely. Start by removing the lower protection panel, then locate the drain bolt on the right side and loosen it using a 14 mm socket spanner. Once all the oil has drained from the system, remove the filter, clean it of any dirt residue, and reassemble everything. Finally, insert the required amount of oil through the upper hole.

Watch the video!


by ScegliAuto

More videos