Do it yourself
Frequently asked questions about cars and motorcycles
In this tutorial, you will see how to replace the engine oil in the Husqvarna TE 610, a very simple and quick operation. Before proceeding, wait for the engine to cool completely to operate safely. Start by removing the lower protection panel, then locate the drain bolt on the right side and loosen it using a 14 mm socket spanner. Once all the oil has drained from the system, remove the filter, clean it of any dirt residue, and reassemble everything. Finally, insert the required amount of oil through the upper hole.

Updated on 6 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Sm 610 In today's video, you will learn how to replace the engine oil and oil filter while performing the regular maintenance service on a Husqvarna SM 610 …
Sm 610 In order to disassemble the engine of the Husqvarna SM 610, you need to loosen the screws that secure it to its housing in the center of the frame, s…
Sm 610 To replace the flywheel on the Husqvarna SM 610, position a tray under the bike to collect the used oil: this will be expelled from the drain plug, w…

How to Replace the Rear Suspension on the Royal Enfield Classic 500

Below are the instructions that will allow you to remove and replace the rear suspension on the Royal Enfield Classic 500 motorcycle. First, place your bike on the centre stand and begin unscrewing the upper and lower suspension bolts to disconnect and remove it; remember that the bike has two suspensions, one on the right side and one on the left. Once removed, you can install the new ones that have the same specifications; finally, adjust the suspensions (if available).

Watch the video!


by ScegliAuto

More videos