Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulb on a Keeway Cityblade?

Model: Keeway Cityblade 125
Part: Light bulb

Video tutorial

To replace the headlight bulb on a Keeway Cityblade, first loosen the bolt located at the front of the bike, just below the windscreen. The other screws to loosen are located just below the instrument panel and at the sides of the handlebars.

Once all these screws are loosened, you will be able to remove the entire front fairing, allowing access to the rear of the headlight. Here, you can disconnect the connector and pull the bulb from its socket, replacing it with a new spare part.


Updated on 16 May 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Wheel of a Keeway Cityblade 125
How to Remove the Rear Wheel of a Keeway Cityblade 125
Cityblade 125 Before starting, position your Keeway Cityblade 125 on the centre stand. Begin by unscrewing and removing the bolts that secure the exhaust terminal.…
How to replace the rear brake pads on a Keeway Cityblade?
How to replace the rear brake pads on a Keeway Cityblade?
Cityblade 125 To replace the rear brake pads on a Keeway Cityblade, you need to loosen all the bolts securing the exhaust and disconnect it so that it can be compl…
How to replace the rear brake pads on a Keeway Cityblade 125?
How to replace the rear brake pads on a Keeway Cityblade 125?
Cityblade 125 To replace the rear brake pads on a Keeway Cityblade 125, first remove the exhaust by unscrewing the bolts that secure it to its supports. Once the e…

How to Set the Time on a Kymco Super Dink 350 Scooter?

In this tutorial, you will see how to set the time on the Kymco Super Dink 350 scooter, a very simple and quick operation to perform, for example, after disconnecting the battery or following a time change. First, switch on the instrument cluster, then navigate to the "ODO" odometer using the "MODE" button. Next, press and hold both the "MODE" and "FUNC" buttons until the clock starts to flash, then release them. At this point, you can adjust the hour using the "RESET" button, switch to minutes with the "MODE" button, and save the setting by pressing the initial buttons a second time.

Watch the video!


by ScegliAuto

More videos