Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Keeway
    3. : Cityblade 125

Keeway Cityblade 125 - Video guides

Keeway Cityblade 125
How to Replace the Headlight Bulb on a Keeway Cityblade?
To replace the headlight bulb on a Keeway Cityblade, first loosen the bolt located at the front of the bike, just below the windscreen. The other screws to …Read all…
Posted on 8 July 2026 by ScegliAuto
Keeway Cityblade 125
How to replace the rear brake pads on a Keeway Cityblade 125?
To replace the rear brake pads on a Keeway Cityblade 125, first remove the exhaust by unscrewing the bolts that secure it to its supports. Once the exhaust is …Read all…
Posted on 2 July 2026 by ScegliAuto
Keeway Cityblade 125
How to replace the rear brake pads on a Keeway Cityblade?
To replace the rear brake pads on a Keeway Cityblade, you need to loosen all the bolts securing the exhaust and disconnect it so that it can be completely …Read all…
Posted on 6 June 2026 by ScegliAuto
Keeway Cityblade 125
How to Remove the Rear Wheel of a Keeway Cityblade 125
Before starting, position your Keeway Cityblade 125 on the centre stand. Begin by unscrewing and removing the bolts that secure the exhaust terminal. Next, …Read all…
Posted on 24 May 2026 by ScegliAuto

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos