|
Do it yourself
| |||
| ||||
|
Model: Keeway Cityblade 125
Before starting, position your Keeway Cityblade 125 on the centre stand. Begin by unscrewing and removing the bolts that secure the exhaust terminal. Next, detach and remove the terminal itself. Once done, remove the right side cover of the wheel by unscrewing the securing bolts. This will free the wheel. Proceed to detach and remove it. After completing this step, you will have successfully removed the rear wheel of your Keeway Cityblade 125.
Updated on 16 April 2026 by ScegliAuto
Video tutorial
Related tutorials
Cityblade 125
To replace the rear brake pads on a Keeway Cityblade 125, first remove the exhaust by unscrewing the bolts that secure it to its supports. Once the e…
Cityblade 125
To replace the headlight bulb on a Keeway Cityblade, first loosen the bolt located at the front of the bike, just below the windscreen. The other scr…
Cityblade 125
To replace the rear brake pads on a Keeway Cityblade, you need to loosen all the bolts securing the exhaust and disconnect it so that it can be compl…
|
How to Change the Engine Oil in a Yamaha MT-03?
In this tutorial, you will see how to change the engine oil in a Yamaha MT-03, a very simple and quick operation. First, ensure that the engine is cool enough, then position a container underneath the bike and remove the lower fairing. Next, unscrew the drain hole bolt using a 12mm socket, allowing all the oil in the system to drain out, and proceed to unscrew the old filter. At this point, simply tighten both the replacement and the bolt, and pour in the new oil through the designated hole. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.383
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
