Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Clutch on the KTM XCF 450?

Model: Ktm Xcf 450
Part: Clutch

Video tutorial

To replace the clutch on the KTM XCF 450, loosen the screws securing the corresponding cover located on the right side of the bike. Once the cover screws are loosened, you can remove it to access the underlying clutch.

By unscrewing the corresponding bolts, you can extract all the discs that make up the clutch, allowing you to insert the new replacement parts. After inserting them, secure them with the corresponding screws and cover everything back up with the cover.


Updated on 5 August 2026 by ScegliAuto


Related tutorials

How to replace the clutch on the KTM XCF 350?
How to replace the clutch on the KTM XCF 350?
Xcf 450 To replace the clutch on the KTM XCF 350, loosen the screws securing the cover of the crankcase located on the right side of the bike, in the lower c…
How to Replace the Battery in a KTM XCF 450?
How to Replace the Battery in a KTM XCF 450?
Xcf 450 To replace the battery in a KTM XCF 450, loosen the screws that secure the seat to its housing: once all these screws are loosened, you can remove th…

How to Change the Engine Oil on a Benelli 150

To change the engine oil on a Benelli 150, ensure the bike is on a stable surface, using the centre stand to keep it upright. Before starting, it's helpful to run the engine for a few minutes to warm the oil and facilitate drainage. Turn off the engine and locate the drain plug situated under the engine. Using an appropriate spanner, loosen the plug and position a container underneath to collect the used oil. Allow it to drain completely, ensuring all the liquid is removed. Once emptied, carefully re-tighten the plug, avoiding overtightening. Using a funnel, slowly pour new oil into the tank, checking the level with the dipstick or inspection window. When the level is correct, start the engine for a couple of minutes to circulate the new oil, then turn it off and check the level again, topping up if necessary.

Watch the video!


by ScegliAuto

More videos