|
Do it yourself
| |||
| ||||
Model: Kawasaki Z1000
Here are the brief instructions for removing and replacing the clutch discs on a Kawasaki Z1000 motorcycle. First, place the motorcycle on a stand and begin draining the engine oil by unscrewing the oil drain bolt located under the engine; then unscrew the fixing screws of the clutch cover to access the clutch, as shown in the video. At this point, unscrew the screws of the clutch pack, removing all the discs; replace and install the new original clutch discs, alternating the cork discs with the metal ones!
Updated on 5 August 2026 by ScegliAuto
Video tutorial
Related tutorials
Z1000
In this guide, you will discover the steps that will allow you to remove and replace the clutch discs on the Kawasaki Z1000 motorcycle. First, place …
Z1000
To replace the clutch on a Kawasaki Z1000, you need to loosen the screws that secure the cover located on the right side of the bike, near the kickst…
Z1000
In today's tutorial, you will see how to disassemble and replace the clutch discs on a Kawasaki Z1000 motorcycle, as well as on the Z750. First, drai…
|
How to Service the Beta RR 350
This video will illustrate the steps to perform the routine maintenance service, replacing the engine oil and oil filter on the Beta RR 350 enduro bike. First, place the bike on a stand and start by loosening the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then clean the small oil filter (replacing it with a new one if too dirty). Finally, top up with new oil, of the correct type for your engine, filling to the maximum level! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.005
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
