Do it yourself
Frequently asked questions about cars and motorcycles

Model: Kawasaki Z1000
Part: Clutch

In this guide, you will discover the steps that will allow you to remove and replace the clutch discs on the Kawasaki Z1000 motorcycle. First, place the motorcycle on a stand and start unscrewing the fastening screws of the clutch cover to remove it. Then, unscrew the screws of the clutch pack, removing the upper plate and sliding out each disc one by one, as shown in the video. At this point, replace and install the new clutch, alternating the two different types of discs; all that remains is to remount the clutch cover and replace the engine oil.

Posted on 2 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Z1000 Here are the brief instructions for removing and replacing the clutch discs on a Kawasaki Z1000 motorcycle. First, place the motorcycle on a stand an…
Z1000 In today's tutorial, you will see how to disassemble and replace the clutch discs on a Kawasaki Z1000 motorcycle, as well as on the Z750. First, drai…
Z1000 To replace the clutch on a Kawasaki Z1000, you need to loosen the screws that secure the cover located on the right side of the bike, near the kickst…

How to Service the Beta RR 350

This video will illustrate the steps to perform the routine maintenance service, replacing the engine oil and oil filter on the Beta RR 350 enduro bike. First, place the bike on a stand and start by loosening the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then clean the small oil filter (replacing it with a new one if too dirty). Finally, top up with new oil, of the correct type for your engine, filling to the maximum level!

Watch the video!


by ScegliAuto

More videos