Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In order to replace the battery of the Triumph Bonneville T100, you need to completely remove the seat of the motorcycle, so that you can access the components located in its lower part: the battery can be released from the corresponding screws and power cables. Once the device is completely freed, it can be removed from its housing and replaced with a new spare part: this can be fixed with the appropriate screws, connecting the power cables and repositioning the seat.

Posted on 7 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Battery on a Triumph Bonneville T100
How to Replace the Battery on a Triumph Bonneville T100
Bonneville T100 To replace the battery on the Triumph Bonneville T100, loosen the screws that secure the seat to its housing: these screws are located on the side of…
How to Replace the Oxygen Sensor on the Triumph Bonneville T100
How to Replace the Oxygen Sensor on the Triumph Bonneville T100
Bonneville T100 Briefly follow these instructions to remove and replace the oxygen sensor on the Triumph Bonneville T100 motorcycle. First, place the bike on the cen…
How to Remove the Battery from a Triumph Bonneville T100
How to Remove the Battery from a Triumph Bonneville T100
Bonneville T100 Today, we will see how to remove and replace the battery on a Triumph Bonneville T100 motorcycle by following these simple and quick steps. First, pl…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos