Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Discover the steps to perform routine maintenance by changing the engine oil and oil filter on the Ducati Hypermotard. First, place your motorcycle on a stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then unscrew the oil filter cartridge located right next to it using the appropriate tool, as shown in the video. At this point, install the new filter and unscrew the filler cap, pouring in the suitable oil for your engine!

Updated on 5 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Change the Engine Oil and Oil Filter on the Ducati Hypermotard
Change the Engine Oil and Oil Filter on the Ducati Hypermotard
Hypermotard Below are the main steps to perform the routine maintenance service by changing the engine oil and oil filter on the Ducati Hypermotard. First, place…
Replacing the Oil Filter and Engine Oil on a Ducati Hypermotard
Replacing the Oil Filter and Engine Oil on a Ducati Hypermotard
Hypermotard This guide shows how to replace the oil filter and engine oil on a Ducati Hypermotard. Position the motorcycle on a side stand (if you do not have a …
How do you replace the motor oil of the Ducati Hypermotard?
How do you replace the motor oil of the Ducati Hypermotard?
Hypermotard The replacement of the motor oil of the Ducati Hypermotard is done by loosening the drain plug of the oil pan, located in the central bottom part of …

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos