Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the transmission oil on the Honda PCX 150 scooter?

Model: Honda Pcx 150
Part: Transmission fluid

Video tutorial

In this tutorial, you will see how to change the transmission oil on the Honda PCX 150 scooter, a very simple and quick operation. First, ensure the engine is completely cold, then locate the three bolts at the end of the casing and position a container underneath them.

Next, remove the two inner bolts using a 12 mm socket, clean them of any dirt, and allow all the oil in the system to drain out. At this point, tighten the lower bolt and, using a pump or syringe, add new oil through the upper hole.


Updated on 5 August 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil on the Honda PCX 150 Scooter?
How to Change the Engine Oil on the Honda PCX 150 Scooter?
Pcx 150 Changing the engine oil on the Honda PCX 150 scooter, as shown in this tutorial, is a straightforward and quick task. First, ensure the engine is coo…
How to Reset the Oil Service on the Honda PCX 150 Scooter?
How to Reset the Oil Service on the Honda PCX 150 Scooter?
Pcx 150 In this tutorial, you will see how to reset the oil service on the Honda PCX 150 scooter, a very simple and quick operation. Before proceeding, ensur…
How to Reset the Oil Service on the Honda PCX 150 Scooter?
How to Reset the Oil Service on the Honda PCX 150 Scooter?
Pcx 150 In this tutorial, you will see how to reset the oil service on the Honda PCX 150 scooter, a very simple and quick operation to perform only after com…

Replacing the Rear Brake Pads of the BMW G310 GS

Follow these brief instructions to remove and replace the rear brake pads (this also applies to the front ones) of the BMW G310 GS motorcycle. First, place the bike on a stand and start by removing the pin and the clip from the rear brake caliper; then remove the old brake pads as shown in the video. Next, clean the caliper of any residual dirt, install the new original brake pads, and secure the pin and clip to lock everything in place, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos