Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha R6
Part: Air filter

The guide shows how to replace the air filter of the Yamaha R6. The first operation to be carried out is to remove the seat and the side panels located under the tank. Remove the bolt on the top of the tank and the two tank mounting bolts. Lift the tank slightly, disconnect the two fuel lines and secure the piece in a vertical position. Remove the fuel hose held by the orange clip and unscrew the eleven bolts holding the air filter in place. Remove the cover and release the air filter to remove it. Clean the filter housing, reassemble everything in place.

Posted on 2 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to change the engine oil of a Yamaha R6?
How to change the engine oil of a Yamaha R6?
R6 To change the engine oil of a Yamaha R6, make sure the bike is positioned on a stable stand and that the engine is warm to facilitate the draining of…
How to Set the Time on the Yamaha R6
How to Set the Time on the Yamaha R6
R6 To manually change the time displayed on the central panel of your 2007 Yamaha R6, follow these steps. First, insert the key and turn on the ignition…

Where are the fuses located on the Piaggio Vespa GTS 125?

The fuses of the Piaggio Vespa GTS 125 are located inside the front fairing of the scooter: to access the fuse box, press the ignition switch fully. This will cause the panel located immediately below the ignition switch to open: the fuse box will be positioned inside this panel, in the upper left area. Inside the box, you will find the fuses that control the operation of the front headlamp, the horn, the ABS, etc. After removing the damaged old fuse, insert a new one with the same amperage.

Watch the video!


by ScegliAuto

More videos