Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Kymco
    3. : Super Dink 350

How to Set the Time on a Kymco Super Dink 350 Scooter?

Model: Kymco Super Dink 350
Part: Clock

Video tutorial

In this tutorial, you will see how to set the time on the Kymco Super Dink 350 scooter, a very simple and quick operation to perform, for example, after disconnecting the battery or following a time change. First, switch on the instrument cluster, then navigate to the "ODO" odometer using the "MODE" button.

Next, press and hold both the "MODE" and "FUNC" buttons until the clock starts to flash, then release them. At this point, you can adjust the hour using the "RESET" button, switch to minutes with the "MODE" button, and save the setting by pressing the initial buttons a second time.


Updated on 8 November 2026 by ScegliAuto


Related tutorials

How to adjust the clock on the Kymco Super Dink 125 scooter?
How to adjust the clock on the Kymco Super Dink 125 scooter?
Super Dink 125 In this tutorial, we can see how to adjust the time on the Kymco Super Dink 125 scooter, an extremely simple and quick operation to be carried out, f…
How to Replace the Battery of the Kymco Super Dink 125
How to Replace the Battery of the Kymco Super Dink 125
Super Dink 125 Today, follow these instructions to remove and replace the battery of the Kymco Super Dink 125 scooter in simple steps. First, place the scooter on i…
How to Change the Engine Oil on a Kymco Super Dink 300 Scooter
How to Change the Engine Oil on a Kymco Super Dink 300 Scooter
Super Dink 300 In this tutorial, learn how to change the engine oil on a Kymco Super Dink 300 scooter, a very simple and quick operation. First, wait until the engi…

How to Replace the USB Socket on the Benelli TRK 502?

To replace the USB socket on the Benelli TRK 502, loosen the screws securing the left side panel of the motorcycle, located just below the handlebars: once this panel is freed, you can remove it and locate the USB socket connector. By disconnecting this connector, you can pull the socket out of its housing: then connect the new socket to the connector, inserting it into its housing. After installation, check that the socket works by reinstalling the panel.

Watch the video!


by ScegliAuto

More videos