Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the seat on the Suzuki GSX-R 600?

Model: Suzuki Gsx R 600
Part: Seat

Video tutorial

In this tutorial we can see how to remove the seat on the Suzuki GSX-R 600, an extremely simple and quick operation, to be carried out for example in case we need to access the battery. First of all, go to one side of the bike, then locate the indicated panel, unclip it and repeat the operation on the opposite side.

Then unscrew the two bolts just released using a 5mm hex key, grab the seat and separate it from the base by pulling it upwards. To install any replacement, just follow the reverse procedure.


Posted on 10 December 2024 by ScegliAuto


Related tutorials

How to replace the battery of the Suzuki GSX-R 600
How to replace the battery of the Suzuki GSX-R 600
Gsx R 600 .. and replacement of the battery of the Suzuki GSX-R 600 motorcycle, in simple and quick steps. First, put the motorcycle on the stand and start disassembling.. …
How do you replace the clutch of the Suzuki GSX-R 600?
How do you replace the clutch of the Suzuki GSX-R 600?
Gsx R 600 .. possible to replace the clutch of the Suzuki GSX-R 600 by loosening the screws that secure the clutch cover, located on the right side of the vehicle.. …
How to Replace the Clutch on a Suzuki GSX-R 600?
How to Replace the Clutch on a Suzuki GSX-R 600?
Gsx R 600 .. You can replace the clutch on the Suzuki GSX-R 600 by loosening the screws that secure the cover on the right side of the vehicle, in the lower central.. …

How to Replace the Belt and Rollers on the Piaggio Vespa GTS 300

This guide briefly outlines the steps to remove and replace the belt and rollers of the variator on the Piaggio Vespa GTS 300 scooter, following the instructions below. First, place your scooter on the centre stand and begin unscrewing the screws of the transmission cover to remove it; then unscrew the nut of the fan and that of the clutch bell, as shown in the video. At this point, remove the belt and then the variator, replacing the rollers found inside; install the new belt and reassemble the transmission!

Watch the video!


by ScegliAuto

More videos