Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the exhaust pipe of the Malaguti Spidermax GT 500?

Model: Malaguti Spidermax Gt 500
Part: Exhaust muffler

Video tutorial

To replace the exhaust pipe of the Malaguti Spidermax GT 500, start by removing the old exhaust pipe, loosening the connecting clamp and loosening the bolts that secure it to its housing. This way, you can remove the old exhaust pipe and insert the new one, which must be connected to the exhaust.

It should be secured by attaching the fixing clamp and connecting the exhaust to the support bracket at the top and bottom. Once the new exhaust pipe is installed, you can start the motorcycle to make sure everything is working properly.


Posted on 6 December 2024 by ScegliAuto


Related tutorials

How to Replace the Switch Panel of the Malaguti Spidermax GT 500?
How to Replace the Switch Panel of the Malaguti Spidermax GT 500?
Spidermax Gt 500 To replace the switch panel of the Malaguti Spidermax GT 500, you need to loosen the screws that secure it to its housing on the left side of the han…
How to Replace the Battery on a Malaguti Spidermax GT 500
How to Replace the Battery on a Malaguti Spidermax GT 500
Spidermax Gt 500 To replace the battery on a Malaguti Spidermax GT 500, lift the panel located at the rear of the bike, near the mudguard. Once this panel is lifted, …
How to Replace the Ignition Switch on the Malaguti Spidermax GT 500?
How to Replace the Ignition Switch on the Malaguti Spidermax GT 500?
Spidermax Gt 500 You can replace the ignition switch on the Malaguti Spidermax GT 500 by loosening the screws that secure the internal trim panels of the front shield…

How to replace the clutch lever on the Sherco SEF 300?

To replace the clutch lever on the Sherco SEF 300, you need to loosen the screws that secure the lever to its housing on the left side of the handlebars. Once these screws are loosened, you can unscrew the nut at the base of the lever to disconnect the clutch cable attached to the corresponding lever. Once the cable is detached, the lever can be removed from its housing and replaced with a new spare part; after installation, ensure that it functions correctly.

Watch the video!


by ScegliAuto

More videos