|
Do it yourself
| |||
| ||||
|
Model: Malaguti Spidermax Gt 500
To replace the switch panel of the Malaguti Spidermax GT 500, you need to loosen the screws that secure it to its housing on the left side of the handlebars. To remove it, loosen the two screws located at the bottom and disconnect the appropriate connectors. Once the switch panel is free, you can detach it from its position and insert the new one, ensuring it is properly secured and connected via the previously disconnected connector.
Updated on 20 September 2026 by ScegliAuto
Video tutorial
Related tutorials
Spidermax Gt 500
To replace the exhaust on a Malaguti Spidermax GT 500, first remove the old exhaust by loosening the clamp and unscrewing the bolts that secure it to…
Spidermax Gt 500
To replace the transmission on the Malaguti Spidermax GT 500, loosen the bolts securing the cover on the left side of the rear wheel. Once the cover …
Spidermax Gt 500
To replace the transmission on the Malaguti Spidermax GT 500, loosen the bolts securing the casing at the rear wheel. Once the casing is open, you wi…
|
How to Replace the Battery in a Yamaha Vino 125 Scooter?
In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
