Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Transmission on the Malaguti Spidermax GT 500?

Model: Malaguti Spidermax Gt 500
Part: Drivetrain

Video tutorial

To replace the transmission on the Malaguti Spidermax GT 500, loosen the bolts securing the casing at the rear wheel. Once the casing is open, you will have access to the underlying components.

Loosen the central pin of the variator and the one for the clutch bell. This will allow you to remove both components along with the drive belt.

Now, install the new variator and the new clutch, placing the drive belt around them and closing the casing with the bolts.


Updated on 11 May 2026 by ScegliAuto


Related tutorials

How to Replace the Transmission on the Malaguti Spidermax GT 500?
How to Replace the Transmission on the Malaguti Spidermax GT 500?
Spidermax Gt 500 To replace the transmission on the Malaguti Spidermax GT 500, loosen the bolts securing the casing at the rear wheel on the left side. Once the casin…
How to Replace the Transmission on the Malaguti Spidermax GT 500?
How to Replace the Transmission on the Malaguti Spidermax GT 500?
Spidermax Gt 500 To replace the transmission on the Malaguti Spidermax GT 500, loosen the bolts securing the cover near the rear wheel on the left side. Once the cove…
How to replace the transmission on a Malaguti Spidermax GT 500?
How to replace the transmission on a Malaguti Spidermax GT 500?
Spidermax Gt 500 To replace the transmission on the Malaguti Spidermax GT 500, loosen the bolts securing the cover on the left side of the rear wheel. Once the cover …

How to Change the Engine Oil in a Suzuki DR 350?

In this tutorial, you will see how to change the engine oil in a Suzuki DR 350, a very simple and quick operation. First, wait until the engine is cold enough, then remove the protective frame located at the bottom. Next, position a container underneath the bike, disconnect the indicated hose, and let all the oil in the system drain out. Then, open the filter housing by unscrewing the three bolts with an 8mm spanner, remove the old filter, and insert the replacement. At this point, you can reassemble everything and pour in the new oil through the designated hole.

Watch the video!


by ScegliAuto

More videos