Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Kymco X Town Ct 300
Part: Clock

In order to set the clock of the Kymco X-Town 300, you need to insert the ignition key into the corresponding slot: once the dashboard is turned on, you can press and hold the MODE button located at the bottom left of the instrument panel. This way, you will notice that the hours will start flashing and you can adjust them by pressing the RESET button repeatedly; pressing the MODE button again will make the minutes start flashing, which can now be adjusted again with the RESET button.

Posted on 30 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Service Light on a Kymco CT 300i Scooter?
How to Reset the Oil Service Light on a Kymco CT 300i Scooter?
X Town Ct 300 In this tutorial, you will see how to reset the oil service light on a Kymco X-Town CT 300 scooter, an extremely simple and quick operation to perfor…
How does the idle control valve work on a Kymco X-Town XT300 scooter?
How does the idle control valve work on a Kymco X-Town XT300 scooter?
X Town Ct 300 In this video, we see how the idle control valve (also known as the ISC valve) works on a Kymco X-Town CT300 scooter. There is a servo motor that mov…

How to Replace the Headlight Bulbs on the KTM RC 200?

As shown in this tutorial, replacing the headlight bulbs on the KTM RC 200 is an extremely simple and quick task. First, ensure that the key is not inserted for safety. Then, approach the headlight in question, locate the bulb holder, and turn it slightly counter-clockwise. Once done, disconnect the power connector, attach the new bulb, and reassemble everything. Avoid touching the glass of the replacement bulb directly with your bare hands, as any residues could cause it to overheat.

Watch the video!


by ScegliAuto

More videos