Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Levers on the Aprilia RSV4 1000

Model: Aprilia Rsv4 1000
Part:

Video tutorial

To replace the levers on the Aprilia RSV4 1000, you need to loosen the nut that secures the lever to its housing: this nut is located at the bottom of the lever, where it is attached to the handlebar. Once the nut is loosened, disconnect the cable attached to it; this will allow you to completely remove the old lever and connect the new one. The new lever can then be secured with the appropriate nut and connected to the corresponding cable to ensure everything functions correctly.


Updated on 7 November 2026 by ScegliAuto


Related tutorials

How to replace the water pump of the Aprilia RSV4 1000
How to replace the water pump of the Aprilia RSV4 1000
Rsv4 1000 In this guide, we will see the main instructions on how to disassemble and replace the water pump of the Aprilia RSV4 1000 motorcycle. First, we put …
How do you replace the exhaust pipe of the Aprilia RSV4 1000?
How do you replace the exhaust pipe of the Aprilia RSV4 1000?
Rsv4 1000 It will be possible to replace the exhaust of the Aprilia RSV4 1000 by loosening the screws that secure the exhaust terminal to its housing: this wil…
How to Replace the Rear Shock Absorber on an Aprilia RSV4 1000
How to Replace the Rear Shock Absorber on an Aprilia RSV4 1000
Rsv4 1000 You can replace the rear shock absorber on an Aprilia RSV4 1000 by loosening the screws that secure it to its housing: this is located at the rear be…

How to Replace the Belt and Rollers on the Piaggio Vespa GTS 300

This guide briefly outlines the steps to remove and replace the belt and rollers of the variator on the Piaggio Vespa GTS 300 scooter, following the instructions below. First, place your scooter on the centre stand and begin unscrewing the screws of the transmission cover to remove it; then unscrew the nut of the fan and that of the clutch bell, as shown in the video. At this point, remove the belt and then the variator, replacing the rollers found inside; install the new belt and reassemble the transmission!

Watch the video!


by ScegliAuto

More videos