Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the exhaust pipe of the Aprilia RSV4 1000?

Model: Aprilia Rsv4 1000
Part: Exhaust muffler

Video tutorial

It will be possible to replace the exhaust of the Aprilia RSV4 1000 by loosening the screws that secure the exhaust terminal to its housing: this will be located near the rear wheel, on the right side of the motorcycle. Once the exhaust terminal has been released, it will be possible to widen the connecting clamp located between the exhaust and the collector: at this point, it will be possible to remove the old exhaust and install the new one. The new exhaust can now be fixed with the appropriate screws, ensuring that everything works properly.


Posted on 9 May 2025 by ScegliAuto


Related tutorials

How do you replace the exhaust of the Aprilia RSV4 1000?
How do you replace the exhaust of the Aprilia RSV4 1000?
Rsv4 1000 The procedure for replacing the muffler of the Aprilia RSV4 1000 can be carried out by loosening the screws that hold the exhaust terminal to its hou…
How to Replace the Air Filter on the Aprilia RSV4 1000
How to Replace the Air Filter on the Aprilia RSV4 1000
Rsv4 1000 Follow this guide to remove and replace the engine air filter on the Aprilia RSV4 1000. First, place the motorcycle on a stand and start by removing …
How to replace the water pump of the Aprilia RSV4 1000
How to replace the water pump of the Aprilia RSV4 1000
Rsv4 1000 In this guide, we will see the main instructions on how to disassemble and replace the water pump of the Aprilia RSV4 1000 motorcycle. First, we put …

How to Replace the Belt and Rollers on the Piaggio Vespa GTS 300

This guide briefly outlines the steps to remove and replace the belt and rollers of the variator on the Piaggio Vespa GTS 300 scooter, following the instructions below. First, place your scooter on the centre stand and begin unscrewing the screws of the transmission cover to remove it; then unscrew the nut of the fan and that of the clutch bell, as shown in the video. At this point, remove the belt and then the variator, replacing the rollers found inside; install the new belt and reassemble the transmission!

Watch the video!


by ScegliAuto

More videos